The RSLinx DF1 Driver can be used for point to point communication between your workstation and an Enhaced PLC-5 Processor, SLC 5/03 or higher, or ControlLogix L6x or lower processor. This document assumes that Channel 0 of your processor has been left to factory defaults (DF1, RS232)
1) First connect your Null Modem cable between your workstation and your processor. You will need to know which COM port you are connected to. You can get this information from your Device Manager in Windows. If your COM port is built into your workstation, this will usually be COM 1, but if you have a USB to serial adapter, simply plug in the adapter with Device Manager open (and PORTS expanded), and it will be easy to see which new COM port is added when you plug in your adapter.
If you already have the driver installed and want to update to a newer version got to 'Let me pick from a list of device drivers on my computer' 6. Click 'Have Disk' 7. Browse to the folder where you extracted the driver and click Ok. About USB Serial Port Driver. Port Device add the ability to have a range of ports to a computer or laptop. Without permission. Oemdrivers.com is not responsible for any damages or losses that may arise from incorrect driver installation. Only install drivers if you are qualified to do so.
2) Open RSLinx Communication Server. RSlinx must first be set up before communication to your processor is possible.
3) Click on “Communication” from the menubar, and choose “Configure Drivers”
4) From the “Available Driver Types” pull down menu, choose RS232, DF1 Devices, then hit “Add New”.
5) For this example, the name can be left at default. Press “OK”.
6) Be sure to choose your COM port that you found in Step 1. The communication parameters can be entered manually, but if you are connected to the processor with your NULL modem cable, simply press the “Auto-Configure” button. RSLinx will test the processor for different baud rates, and other settings, until it finds a setting it gets a response on. You will get a message that the autoconfiguration was successful. If you received a message that the autoconfiguration has failed, be sure that you have the correct cable, the processor is powered on, Channel 0 is at factory default setting (DF1), and the correct COM port has been selected, then try the Auto-Confugure button again.
7) You will now see the driver is running. Close the driver configuration screen.
8) Now lets, verify communication by opening the RSWho Screen within RSLinx. This can be found under the “Communication” menu, or you can hit the RSWho Icon on the standard toolbar.
9) Click your DF1 Driver on the left side of the RSWho Screen. The devices you are communicating with will appear on the right.
To go Online with the processor, you must go to RSLogix at this point
MTK USB Serial Port Driver v1.1 is a small application for windows computer created by Mediatek Mobility Team, which allows you to install the Mediatek USB Driver on the Windows Computer.
MTK USB Serial Port Driver helps the PC to identify your phone in order to flash the stock firmware, flash the IMEI or simply transfer any file from your android Phone to another device.
It allows you to install the required driver on the PC for android devices running on mediatek chipset only. Since, it is an open source tool, You may use it free for always.
Drivers Do-it-auto Port Devices Lucie
In order to use the MTK USB Serial Port Driver, you need to install the Universal ADB Driver on your computer.
After installing the Android Universal Driver on your computer you need to connect your Android device to the computer using the USB data cable. And once your Android device is detected by the computer, you need to launch the Tool.
MTK USB Serial Port Driver v1.1
Package Name: MTK_USB_Serial_Port_Driver_v1.1.zip
Alternative Name: MTK USB Serial Port Driver v1.1
Package Version: v1.1
Package Size: 757 KB
Readme Once:
[*] Compatibility: The MTK USB Serial Port Driver runs perfectly on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10 (32 bit and 64 bit).
[*] Take a Backup: If you are willing to try the above tool, then please take a backup of your personal data from your Android Smartphone or Tablet. As flashing any Firmware or recovery may brick the device.
[*] Other Tools: If you are searching for other useful tools then follow our Tools Section to download free GSM Tools.
Drivers Do-it-auto Port Devices Replicator
[*] Credits: The MTK USB Serial Port Driver is created and distributed by Mediatek Mobility Team (developer). So, full credits goes to Mediatek Mobility Team (developer) for sharing the tool for free.